DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
74
Parameter Description
State
Select to enable or disable the DHCP Relay feature on the specified port(s).
Click the Apply button to accept the changes made.
DHCP Local Relay VLAN
This window is used to display and configure local relay on a VLAN or a group of VLANs.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN, as shown
below:
Figure 4-56 DHCP Local Relay VLAN Window
The fields that can be configured are described below:
Parameter Description
DHCP Local Relay VID List
Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select
all VLANs.
State
Select this option to enable or disable the DHCP local relay on the specific
VLAN(s).
Click the Apply button to accept the changes made.
NOTE: When the state of the DHCP relay port is disabled, the port will not relay or locally relay
received DHCP packets.
DHCPv6 Relay
DHCPv6 Relay Global Settings
This window is used to display and configure the DHCPv6 Relay remote ID settings.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as
shown below:
To Next Page
Loading...
