D-Link DGS-3630 SERIES - PTP Foreign Master Records Port Information; USB Console Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
30
Parameter Description
Unit
Select the Switch unit that will be used here.
PTP Foreign Master Records Port Information
This window is used to view PTP Foreign Master Records port information.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Foreign Master Records Port
Information, as shown below:
Figure 3-26 PTP Foreign Master Records Port Information Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used here.
USB Console Settings
This window is used to display and configure the USB console settings.
To view the following window, click System > USB Console Settings, as shown below:
Figure 3-27 USB Console Settings Window
The fields that can be configured are described below:
Parameter Description
USB Console State
Select to enable or disable the USB console state here.
USB Inactivity Timeout
Enter the USB inactivity timeout value here. The range is from 1 to 240 minutes.
Select the Active option to disable the timeout feature.
Click the Apply button to accept the changes made.
NOTE: When an active console connection is made to both the RJ45 console port and the mini-USB
console port at the same time, the mini-USB console port will have higher priority.