D-Link DGS-3630 SERIES - SNMP Engine ID Local Settings; SNMP User Table Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
43
SNMP Engine ID Local Settings
The Engine ID is a unique identifier used for SNMPv3 implementations on the Switch.
To view the following window, click Management > SNMP > SNMP Engine ID Local Settings, as shown below:
Figure 4-12 SNMP Engine ID Local Settings Window
The fields that can be configured are described below:
Parameter Description
Engine ID
Enter the SNMP engine ID string here. This string can be up to 24 characters
long.
Click the Default button to revert the engine ID to the default.
Click the Apply button to accept the changes made.
SNMP User Table Settings
This window is used to display and configure the SNMP users that are currently configured on the Switch.
To view the following window, click Management > SNMP > SNMP User Table Settings, as shown below:
Figure 4-13 SNMP User Table Settings Window
The fields that can be configured are described below:
Parameter Description
User Name
Enter SNMP user name here. This name can be up to 32 characters long. This is
used to identify the SNMP user.
Group Name
Enter the SNMP group name to which the user belongs. This name can be up to
32 characters long. Spaces are not allowed.