DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
6
3. System
Device Information
System Information Settings
Peripheral Settings
Port Configuration
Loopback Test
System Log
Time and SNTP
Time Range
PTP (Precise Time Protocol)
USB Console Settings
SRM
Device Information
In the Device Information section, the user can view a list of basic information regarding the Switch. It appears
automatically when you log on to the Switch. To return to the Device Information window after viewing other windows,
click the DGS-3630-28TC link.
Figure 3-1 Device Information Window
System Information Settings
This window is used to display and configure the system information settings and management interface configuration
settings.
To view the following window, click System > System Information Settings, as shown below:
To Next Page
Loading...
