DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
433
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Direction
Select the direction here. Options to choose from are In and Out.
Click the Back button to return to the previous step.
Click the Apply button to accept the changes made and return to the main ACL Wizard window.
ACL Access List
This window is used to display and configure the ACLs, ACL rules and settings.
To view the following window, click ACL > ACL Access List, as shown below:
Figure 8-8 ACL Access List Window
The fields that can be configured are described below:
Parameter Description
ACL Type
Select the ACL type to find here. Options to choose from are All, IP ACL, IPv6
ACL, MAC ACL, and Expert ACL.
ID
Select and enter the access list ID here. The range is from 1 to 14999.
ACL Name
Select and enter the access list name here. This name can be up to 32 characters
long.
Click the Find button to locate a specific entry based on the information entered.
Click the Add ACL button to create a new ACL.
Click the Edit button to re-configure the specific ACL.
Click the Delete button, next to the ACL, to remove the specific ACL.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Clear All Counter button to clear all the counter information displayed.
Click the Clear Counter button to clear the counter information for the rule displayed.
Click the Add Rule button to create an ACL rule for the ACL selected.
To Next Page
Loading...
