DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
175
Figure 5-66 L2 Flex Links Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit of the primary port here.
Primary Port
Select the primary port here.
Unit
Select the Switch unit of the backup port here.
Backup Port
Select the backup port here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
NOTE: Flex Link and STP, ERPS and LBD are mutually exclusive.
L2 Protocol Tunnel
This window is used to display and configure the Layer 2 protocol tunnel settings.
To view the following window, click L2 Features > L2 Protocol Tunnel, as shown below:
Figure 5-67 L2 Protocol Tunnel (L2 Protocol Tunnel Global Setting) Window
The fields that can be configured are described below:
Parameter Description
CoS for Encapsulated
Packets
Select the CoS value for encapsulated packets here. This value is between 0 and
7. Select the Default option to use the default value.
Drop Threshold
Enter the drop threshold value here. This value must be between 100 and 20000.
To Next Page
Loading...
