DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
65
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings,
as shown below:
Figure 4-44 DHCPv6 Server Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the interface VLAN ID here. The range is from 1 to 4094.
Pool Name
Enter the DHCPv6 server pool name here. This name can be up to 12 characters
long.
Rapid Commit
Select to enable or disable two-message exchange here. By default, two-
message exchange is not allowed.
Preference
Enter the preference value here. Select the Allow Hint option to allow hints.
Interface Name
Enter the interface name here.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Server Operational Information
This window is used to display the DHCPv6 server operational information.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Operational
Information, as shown below:
Figure 4-45 DHCPv6 Server Operational Information Window
DHCP Relay
DHCP Relay Global Settings
This window is used to display and configure the global DHCP relay settings.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Global Settings, as shown
below:
To Next Page
Loading...
