DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
268
OSPFv3
OSPFv3 Process Settings
This window is used to display and configure OSPFv3 process settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Process Settings, as shown below:
Figure 6-78 OSPFv3 Process Settings Window
The fields that can be configured are described below:
Parameter Description
Process ID
Enter the OSPFv3 process ID here. The range is from 1 to 65535.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
Click the Process ID link (1) to access and configure the specified OSPFv3 process.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-79 OSPFv3 Process Settings (Edit) Window
The fields that can be configured are described below:
Parameter Description
Router ID
Enter the router ID for the OSPF process here.
To Next Page
Loading...
