D-Link DGS-3630 SERIES - ARP Aging Time; Static ARP

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
215
ARP Aging Time
This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
Figure 6-2 ARP Aging Time Window
The fields that can be configured are described below:
Parameter Description
Timeout
After click the Edit button, enter the ARP aging timeout value here.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Static ARP
This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
Figure 6-3 Static ARP Window
The fields that can be configured are described below:
Parameter Description
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
IP Address
Enter the IP address that will be associated with the MAC address here.
Hardware Address
Enter the MAC address that will be associated with the IP address here.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.