D-Link DGS-3630 SERIES - Configuration Backup to FTP

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
616
Parameter Description
Destination File
Enter the destination path and location where the configuration file should be
stored on the TFTP server. This field can be up to 64 characters long.
Click the Backup button to initiate the configuration file backup.
Configuration Backup to FTP
This window is used to initiate a configuration file backup to an FTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to FTP, as
shown below:
Figure 15-16 Configuration Backup to FTP Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
FTP Server IP
Enter the FTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the FTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the FTP server in the space provided.
TCP Port
Enter the TCP port number used for the FTP connection here. The range is from
1 to 65535.
User Name
Enter the user name used for the FTP connection here. This name can be up to
32 characters long.
Password
Enter the password used for the FTP connection here. This password can be up
to 15 characters long.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Source File
Enter the source filename and path of the configuration file located on the Switch
here. This field can be up to 64 characters long. Select the running-config option
to back up the running configuration file from the Switch. Select the startup-
config option to back up the start-up configuration file from the Switch.
Destination File
Enter the destination path and location where the configuration file should be
stored on the FTP server. This field can be up to 64 characters long.
Click the Backup button to initiate the configuration file backup.