DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
478
Figure 9-34 TACACS Global Settings Window
The fields that can be configured in TACACS Global IPv4 Source Interface are described below:
Parameter Description
IPv4 TACACS Source
Interface Name
Enter the name of the IPv4 TACACS+ source interface here.
Click the Apply button to accept the changes made.
The fields that can be configured in TACACS Global IPv6 Source Interface are described below:
Parameter Description
IPv6 TACACS Source
Interface Name
Enter the name of the IPv6 TACACS+ source interface here.
Click the Apply button to accept the changes made.
TACACS Server Settings
This window is used to display and configure the TACACS+ server settings.
To view the following window, click Security > TACACS > TACACS Server Settings, as shown below:
Figure 9-35 TACACS Server Settings Window
The fields that can be configured are described below:
Parameter Description
IP Address
Enter the TACACS+ server IPv4 address here.
IPv6 Address
Enter the TACACS+ server IPv6 address here.
Port
Enter the port number used here. This value must be between 1 and 65535. By
default, this value is 49.
Timeout
Enter the timeout value here. This value must be between 1 and 255 seconds. By
default, this value is 5 seconds.
Key Type
Select the key type that will be used here. Options to choose from are Plain Text
and Encrypted.
To Next Page
Loading...
Need help?
General
