DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
112
Figure 4-99 About Window
Firmware Upgrade
This window is used to view and upgrade firmware from the Commander Switch to the Member Switch. Member
Switches will be listed in the table.
To view the following window, click Management > Virtual Stacking (SIM) > Firmware Upgrade, as shown below:
Figure 4-100 Firmware Upgrade Window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address.
Path \ Filename
Enter the path and file name.
Click the Download button to update the firmware.
To specify a certain Switch for firmware download, tick its corresponding check box.
Configuration File Backup/Restore
This window is used to view and upgrade configuration files from the Commander Switch to the Member Switch using
a TFTP server. Member Switches will be listed in the table.
To view the following window, click Management > Virtual Stacking (SIM) > Configuration File Backup/Restore,
as shown below:
To Next Page
Loading...
