DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
219
Interface
IPv4 Interface
This window is used to display and configure the IPv4 interface settings.
To view the following window, click L3 Features > Interface > IPv4 Interface, as shown below:
Figure 6-8 IPv4 Interface Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the interface VLAN ID here. This value must be between 1 and 4094.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will be available.
Figure 6-9 IPv4 Interface (Edit) Window
To Next Page
Loading...
