D-Link DGS-3630 SERIES - TACACS Group Server Settings

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
479
Parameter Description
Key
Enter the key, used to communicate with the TACACS+ server, here. This key
can be up to 254 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
TACACS Group Server Settings
This window is used to display and configure the TACACS+ group server settings.
To view the following window, click Security > TACACS > TACACS Group Server Settings, as shown below:
Figure 9-36 TACACS Group Server Settings Window
The fields that can be configured are described below:
Parameter Description
Group Server Name
Enter the TACACS+ group server name here. This name can be up to 32
characters long.
IPv4 TACACS Server IP
Enter the group server IPv4 address here.
IPv6 TACACS Server IP
Enter the group server IPv6 address here.
Click the Add button to add a new entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the TACACS+ group server.
Click the Delete button to remove the specified entry.
After clicking the Show Detail button, the following page will be available.
Figure 9-37 TACACS Group Server Settings (Show Detail) Window