DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
349
Parameter Description
Regular Expression
Enter the regular expression here. This string can be up to 80 characters long.
Click the Apply button to accept the changes made.
BGP Clear Settings
This window is used to display and configure the BGP clear settings.
To view the following window, click L3 Features > BGP > BGP Clear Settings, as shown below:
Figure 6-189 BGP Clear Settings Window
The fields that can be configured are described below:
Parameter Description
Address Family
Select the address family that will be used here. Options to choose from are:
• IPv4 Unicast - Specifies to use the IPv4 unicast address family in this
configuration.
• IPv4 VRF - Specifies to use a VRF instance in this configuration. Enter the
name of the VRF instance in the space provided or click the Please Select
button to select a pre-configured VRF instance that will be used here. This
name can be up to 12 characters long.
• IPv4 Multicast - Specifies to use the IPv4 multicast address family in this
configuration.
• L2VPN VPLS - Specifies to use the Layer 2 VPN VPLS address family.
• VPNv4 - Specifies to use the VPNv4 address family.
• IPv6 Unicast - Specifies to use the IPv6 unicast address family in this
configuration.
Type
Select the BGP type here. Options to choose from are:
• All - Specifies to clear of all the BGP peer sessions in the specified address
family.
• AS Number - Specifies to clear all the BGP peer sessions in the specified
AS.
• Peer Group - Specifies to clear all the BGP peer sessions in the peer group.
• Neighbor Address - Specifies to clear all the BGP peer sessions associated
with the neighbor address.
• External - Specifies to clear all the BGP peer sessions using hard or soft
reconfiguration.
AS Number
Enter the AS number of which the BGP peer session will be cleared here. The
range is from 1 to 4294967295.
To Next Page
Loading...
