DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
7
Figure 3-2 System Information Settings Window
The fields that can be configured in System Information Settings are described below:
Parameter Description
System Name
Enter a system name for the Switch, if so desired. This name will identify it in the
Switch network.
System Location
Enter the location of the Switch, if so desired.
System Contact
Enter a contact name for the Switch, if so desired.
Click the Apply button to accept the changes made.
The fields that can be configured in Management Interface are described below:
Parameter Description
State
Select to enable or disable the state of the management interface here.
IPv4 Address
Enter the IPv4 address for this interface here.
Subnet Mask
Enter the IPv4 subnet mask for this interface here.
Gateway
Enter the gateway IPv4 address for this interface here.
Description
Enter the description for the management interface here. This can be up to 64
characters long.
Click the Apply button to accept the changes made.
Peripheral Settings
This window is used to display and configure the environment trap settings and environment temperature threshold
settings.
To view the following window, click System > Peripheral Settings, as shown below:
To Next Page
Loading...
