DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
382
The fields that can be configured are described below:
Parameter Description
Area Tag
Enter the ISIS area tag that will be used in this display here. This can be up to 16
characters long.
Level
Select the routing level that will be used here. Options to choose from are Level-1
and Level-2.
LSP ID
Enter LSP ID that will be used in the display here. This specifies to display the
contents of a single LSP by its ID number.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view more detailed information for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 6-230 ISIS Database (Show Detail) Window
Click the Back button to return to the previous window.
ISIS Topology
This window is used to view the ISIS path to the Intermediate System.
To view the following window, click L3 Features > ISIS > ISIS Topology, as shown below:
Figure 6-231 ISIS Topology Window
The fields that can be configured are described below:
Parameter Description
Protocol
Select the protocol that will be used in the display here. Options to choose from
are:
To Next Page
Loading...
