DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
209
Parameter Description
Maximum Frame Size
Select this option to enable or disable the Maximum Frame Size TLV to send. The
Maximum Frame Size TLV indicates the maximum frame size capability of the
implemented MAC and PHY.
Energy-Efficient Ethernet
Select this option to enable or disable the Energy Efficient Ethernet TLV to send.
The Energy Efficient Ethernet TLV indicates the reduce energy consumption
capability of a link when no packets are being sent.
Click the Apply button to accept the changes made.
LLDP-MED Port Settings
The LLDP-MED Port Settings page is used to enable or disable outbound LLDP advertisements for LLDP-MED TLVs.
To view the following window, click L2 Features > LLDP > LLDP-MED Port Settings, as shown below:
Figure 5-101 LLDP-MED Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Notification
Select this option to enable or disable transmitting the LLDP-MED notification
TLV.
Capabilities
Select this option to enable or disable transmitting the LLDP-MED capabilities
TLV.
Inventory
Select this option to enable or disable transmitting the LLDP-MED inventory
management TLV.
Network Policy
Select this option to enable or disable transmitting the LLDP-MED network policy
TLV.
Click the Apply button to accept the changes made.
LLDP-DCBX Port Settings
The LLDP-DCBX Port Settings page is used to enable or disable outbound LLDP advertisements for Data Center
Bridging Exchange protocol (DCBX) TLVs.
To view the following window, click L2 Features > LLDP > LLDP-DCBX Port Settings, as shown below:
To Next Page
Loading...
