DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 
342 
Parameter  Description 
•  IPv4 VRF - Specifies to use a VRF instance in this configuration. Enter the 
name of the VRF instance in the space provided or click the Please Select 
button to select a pre-configured VRF instance that will be used here. This 
name can be up to 12 characters long. 
•  IPv4 Multicast - Specifies to use the IPv4 multicast address family in this 
configuration. 
•  IPv6 Unicast - Specifies to use the IPv6 unicast address family in this 
configuration. 
Type 
Select the type clear here. Options to choose from are: 
•  All - Specifies to display and clear all BGP dampening dampened paths. 
•  IP Address - Specifies to display and clear BGP dampening dampened 
paths based on the IPv4 address entered. Enter the IPv4 address in the 
space provided. 
•  Network Address - Specifies to display and clear BGP dampening 
dampened paths based on the IPv4 network address range entered. Enter 
the starting IPv4 address and the ending IPv4 address in the range in the 
spaces provided. 
•  IPv6 Address - Specifies to display and clear BGP dampening dampened 
paths based on the IPv6 address entered. Enter the IPv6 address in the 
space provided. 
•  IPv6 Network Address - Specifies to display and clear BGP dampening 
dampened paths based on the IPv6 network address range entered. Enter 
the IPv6 address and the prefix length in the space provided. 
Click the Clear button to clear the information associated with the selections made. 
 
After clicking the Please Select button, the following page will appear. 
 
Figure 6-181 BGP Dampening Dampened Paths Table (Please Select) Window 
 
Select the VRF entry and click the OK button to use the selected VRF entry. 
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 
 
BGP Dampening Flap Statistics Table 
This window is used to view and clear the BGP dampening flap statistics. 
To view the following window, click L3 Features > BGP > BGP Dampening Flap Statistics Table, as shown below: