DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
31
SRM
The Switch Resource Management (SRM) feature provides a large number of resources that can be distributed and
optimized as needed by applications. It provides resource configuration flexibility that allows users to allocate more
resources for tables that require more entries and prevents wasting resources on unused functions.
SRM Prefer Current Settings
This window is used to display and configure the SRM settings. This window is used to specify the SRM mode to be
used on the Switch for optimizing resources for various functions.
To view the following window, click System > SRM > SRM Prefer Current Settings, as shown below:
Figure 3-28 SRM Prefer Current Settings Window
The fields that can be configured are described below:
Parameter Description
SRM Prefer Mode
Select the SRM prefer mode here. Options to choose from are:
• LAN - Specifies that the Switch prefers the LAN Switch mode.
• IP - Specifies that the Switch prefer the IP route mode.
• L2VPN - Specifies that the Switch prefer the Layer 2 VPN mode.
Click the Apply button to accept the changes made.
NOTE: When the SRM mode was modified and the Switch was rebooted, the table size will be
changed. If the number of static entries saved in the startup configuration exceeds the number
of static entries in the new table size, the exceeded number of entries will be removed.
NOTE: When Switches are physically stacked, ensure that all Switches in the stack are configured to
use the same SRM mode.
SRM Prefer Mode
This window is used to view the SRM preferred mode settings. The entries in this table are fixed values indicating the
maximum number of entries allowed per feature.
To view the following window, click System > SRM > SRM Prefer Mode, as shown below:
To Next Page
Loading...
