DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
359
Neighbor Activate
This window is used to view, activate and deactivate BGP neighbors.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Activate, as shown below:
Figure 6-201 Neighbor Activate Window
The fields that can be configured are described below:
Parameter Description
Address Family
Select the address family that will be used here. Options to choose from are:
• IPv4 Unicast - Specifies to activate/deactivate the BGP neighbor related to
the IPv4 unicast address family.
• IPv4 VRF - Specifies to activate/deactivate the BGP neighbor related to the
VRF instance in the IPv4 address family. Enter the name of the VRF
instance here. This name can be up to 12 characters long. Alternatively, click
the Please Select button to select a pre-configured VRF instance that will be
used here.
• IPv4 Multicast - Specifies to activate/deactivate the BGP neighbor related to
the IPv4 multicast address family.
• L2VPN VPLS - Specifies to activate/deactivate the BGP neighbor related to
the Layer 2 VPN VPLS address family.
• IPv6 Unicast - Specifies to activate/deactivate the BGP neighbor related to
the IPv6 unicast address family.
• VPNv4 - Specifies to activate/deactivate the BGP neighbor related to the
VPNv4 address family.
Neighbor
Select and enter the BGP neighbor here. Options to choose from are:
• IPv4 Address - Enter the IPv4 address of the BGP neighbor here.
• Peer Group - Enter the name of the peer group of the BGP neighbor here.
This name can be up to 16 characters long.
• IPv6 Address - Enter the IPv6 address of the BGP neighbor here.
Action
Select to activate or deactivate the BGP neighbor here. Options to choose from
are Activate and No Activate.
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following page will appear.
Figure 6-202 Neighbor Activate (Please Select) Window
To Next Page
Loading...
