DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
511
Parameter Description
Authorization State
Select to enable or disable the authorized state here. The option is used to enable
or disable the acceptance of an authorized configuration. When authorization is
enabled for authentication, the authorized attributes (for example VLAN, 802.1p
default priority, bandwidth, and ACL) assigned by the RADIUS server will be
accepted if the authorization status is enabled. Bandwidth and ACL are assigned
on a per-port basis. If in the multi-authenticated mode, VLAN and 802.1p are
assigned on a per-host basis. Otherwise, Bandwidth and ACL are assigned on a
per-port basis.
Click the Apply button to accept the changes made.
The fields that can be configured in User Information are described below:
Parameter Description
User Name
Enter the user name used here. This name can be up to 32 characters long.
VID
Enter the VLAN ID used here.
Password Type
Select the password type option here. Options to choose from are Plain Text and
Encrypted.
Password
Enter the password used here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Network Access Authentication Port Settings
This window is used to display and configure the network access authentication port settings.
To view the following window, click Security > Network Access Authentication > Network Access Authentication
Port Settings, as shown below:
Figure 9-76 Network Access Authentication Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
To Next Page
Loading...
