D-Link DGS-3630 SERIES - Topology

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
105
Parameter Description
for SIM.
Group Name
Enter a group name. This is optional. This name is used to segment Switches into
different SIM groups.
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Settings are described below:
Parameter Description
Trap State
Select to enable or disable the SIM trap state here.
Interval
Enter the interval in seconds. The range is from 30 to 90.
Hold Time
Enter the hold-time in seconds. The range is from 100 to 255.
Management VLAN
Enter the single IP management message VLAN ID.
Click the Apply button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid in configuring SIM through the Web UI, including Topology, Firmware Upgrade, Configuration
File Backup/Restore and Upload Log File.
Topology
This window is used to view, manage and configure the Switch within the SIM group and requires Java script to
function properly on your computer.
To view the following window, click Management > Virtual Stacking (SIM) > Topology, as shown below: