DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
106
Figure 4-87 Topology Window
The fields that can be configured are described below:
Parameter Description
Device Name
Display the Device Name of the Switches in the SIM group configured by the
user. If the device is not configured with a name, it will be given the name ‘default’
and tagged with the last six digits of the MAC address to identify it.
Local Port
Display the number of the physical port on the CS that the MS or CaS is
connected to. The CS will have no entry in this field.
Speed
Display the connection speed between the CS and the MS or CaS.
Remote Port
Display the number of the physical port on the MS or CaS to which the CS is
connected. The CS will have no entry in this field.
MAC Address
Display the MAC address of the corresponding Switch.
Model Name
Display the full model name of the corresponding Switch.
To view the Topology View window, open the View drop-down menu in the toolbar and then click Topology, which
will open the following Topology Map. This window will refresh itself periodically (20 seconds by default).
To Next Page
Loading...
