DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
585
13. Monitoring
VLAN Counter
Utilization
Statistics
Mirror Settings
sFlow
Device Environment
External Alarm Settings
VLAN Counter
This window is used to display and configure the VLAN counter settings. This is used to create a control entry for
traffic statistics on specified Layer 2 VLAN interface(s).
To view the following window, click Monitoring > VLAN Counter, as shown below:
Figure 13-1 VLAN Counter Window
The fields that can be configured for VLAN Counter Settings are described below:
Parameter Description
Interface VLAN
Enter the VLAN ID that will be used here. The range is from 1 to 4094.
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here. Select the
All option to use all the ports in this configuration.
Frame Type
Select the frame type here. Options to choose from are:
• Broadcast - Specifies to count only broadcast frames.
• Multicast - Specifies to count only multicast frames.
• Unicast - Specifies to count only unicast frames.
• Any - Specifies to count all frames regardless of the frame type.
• All - Specifies to count all frames regardless of the frame type.
Traffic Direction
Select the traffic direction here. Options to choose from are:
• RX - Specifies to count ingress traffic.
• TX - Specifies to count egress traffic.
To Next Page
Loading...
