DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
358
Parameter Description
Address Family
Select the address family that will be used here. Options to choose from are:
• IPv4 Unicast - Specifies to display the BGP peer group table related to the
IPv4 unicast address family.
• VPNv4 All - Specifies to display the BGP peer group table related to the
whole VPNv4 address family.
• VPNv4 RD - Specifies to display the BGP peer group table related to the
Route Distinguisher (RD) in the VPNv4 address family. Enter the RD in the
space provided.
• VPNv4 VRF - Specifies to display the BGP peer group table related to the
VRF instance in the VPNv4 address family. Enter the name of the VRF
instance here. This name can be up to 12 characters long. Alternatively, click
the Please Select button to select a pre-configured VRF instance that will be
used here.
Group Name
Enter the name of the BGP peer group here. This name can be up to 16
characters long.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Show Detail button to view more detailed information about the specific entry.
After clicking the Please Select button, the following page will appear.
Figure 6-199 Peer Group (Please Select) Window
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 6-200 Peer Group (Show Detail) Window
Click the Back button to return to the previous window.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
