DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
357
Figure 6-198 Peer Group Window
The fields that can be configured in Peer Group are described below:
Parameter Description
Group Name
Enter the name of the BGP peer group here. This name can be up to 16
characters long.
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Please Select button to select a pre-configured VRF instance that
will be used here.
Remote AS Number
Enter the remote AS number here. The range is from 1 to 4294967295.
Action
Select the action that will be taken here. Options to choose from are Add and
Delete.
Click the Apply button to accept the changes made.
The fields that can be configured in Peer Group Member are described below:
Parameter Description
IP Address
Select and enter the IPv4 or IPv6 address of the BGP peer group member here.
Group Name
Enter the name of the BGP peer group member here. This name can be up to 16
characters long.
Action
Select the action that will be taken here. Options to choose from are Add and
Delete.
Click the Apply button to accept the changes made.
The fields that can be configured in Peer Group Table are described below:
To Next Page
Loading...
