DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
347
Figure 6-187 BGP Community List Settings Window
The fields that can be configured are described below:
Parameter Description
List Name
Enter the name of the community list here. This name can be up to 16 characters
long.
Type
Select the type here. Options to choose from are:
• Standard - Specifies to configure a named standard community list.
• Expanded - Specifies to configure a named expanded community list.
Mode
Select the mode here. Options to choose from are:
• Permit - Specifies the routes match conditions are permitted.
• Deny - Specifies the routes match conditions are denied.
• None - Specifies that no action will be taken.
Community Number
Enter the community number here. It can be a user-specified number represented
by AA:NN, where AA (AS number) is the upper part of the word and NN
(community number, user-specified) is the lower part of the word. Multiple
community numbers (separated by space) can be specified.
Regular Option
Select the regular option here. Options to choose from are:
• Internet - Specifies the Internet community. Routes with this community are
advertised to all peers.
• Local AS - Specifies the local AS community. Routes with this community
are not sent out of the local AS or sub-AS of a confederation.
• No Advertise - Specifies the no advertise community. Routes with this
community are not advertised to other BGP peers.
• No Export - Specifies the no export community. Routes with this community
are not advertised to external peers.
Regular Expression
Enter the regular expression here. This configures a regular expression that is
used to specify a pattern to match against an input string. Regular expressions
can be used only with expanded community lists. This string can be up to 80
characters long.
Click the Apply button to accept the changes made.
To Next Page
Loading...
