DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
504
Figure 9-69 MAC Authentication Window
The fields that can be configured in MAC Authentication Global Settings are described below:
Parameter Description
MAC Authentication State
Select to enable or disable the global MAC authentication state.
MAC Authentication Trap
State
Select to enable or disable the MAC authentication trap state.
Click the Apply button to accept the changes made.
The fields that can be configured in MAC Authentication User Name and Password Settings are described below:
Parameter Description
User Name
Enter the username used for MAC authentication here. This name can be up to
16 characters long. Tick the Default option to restore the username to the client
MAC address here.
Password
Enter the password used for MAC authentication here. Tick the Encrypt option
save this password in the encrypted form. Tick the Default option to restore the
password to the client MAC address here.
Click the Apply button to accept the changes made.
The fields that can be configured in MAC Authentication Port Settings are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable MAC authentication for the port(s) specified here.
Click the Apply button to accept the changes made.
To Next Page
Loading...
