D-Link DGS-3630 SERIES - Page 134

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
122
Parameter Description
value is 300 seconds.
Aging Destination Hit
Select to enable or disable the aging destination hit function.
Click the Apply button to accept the changes made.
After selecting the MAC Address Port Learning Settings tab option, at the top of the page, the following page will be
available.
Figure 5-4 MAC Address Table Settings (MAC Address Port Learning Settings) Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
Status
Select to enable or disable the MAC address learning function on the ports
specified here.
Click the Apply button to accept the changes made.
After selecting the MAC Address VLAN Learning Settings tab option, at the top of the page, the following page will
be available.
Figure 5-5 MAC Address Table Settings (MAC Address VLAN Learning Settings) Window