DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
129
Figure 5-14 GVRP Advertise VLAN Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
Action
Select the advertised VLAN to port mapping action here. Options to choose from
are All, Add, Remove, and Replace. When selecting All, all the advertised
VLANs will be used.
Advertise VID List
Enter the advertised VLAN ID list here.
Click the Apply button to accept the changes made.
GVRP Forbidden VLAN
This window is used to display and configure the GVRP forbidden VLAN settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Forbidden VLAN, as shown below:
Figure 5-15 GVRP Forbidden VLAN Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
To Next Page
Loading...
