DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
178
Parameter Description
VID
Enter a VLAN ID from 1 to 4094, and select to enable or disable IGMP snooping
on the VLAN.
Click the Apply button to accept the changes made.
The fields that can be configured in IGMP Snooping Table are described below:
Parameter Description
VID
Enter a VLAN ID from 1 to 4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Click the Show Detail button to see the detail information of the specific VLAN.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Figure 5-70 IGMP Snooping Settings (Show Detail) Window
The window displays the detail information about IGMP snooping VLAN.
Click the Modify button to edit the information in the following window.
After clicking the Modify or Edit button in IGMP Snooping Settings window, the following window will appear.
To Next Page
Loading...
