DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
184
After clicking the Please Select button, the following page will appear.
Figure 5-75 IGMP Snooping Filter Settings (Please Select) Window
Select the ACL and click the OK button to use the selected access list.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Figure 5-76 IGMP Snooping Filter Settings (Show Detail) Window
Click the Back button to return to the previous window.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Snooping Mrouter Settings
This window is used to display and configure the IGMP Snooping Mrouter settings.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Mrouter Settings, as shown below:
Figure 5-77 IGMP Snooping Mrouter Settings Window
The fields that can be configured in IGMP Snooping Mrouter Settings are described below:
To Next Page
Loading...
