D-Link DGS-3630 SERIES - Page 251

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
239
Click the Back button to return to the previous window.
The fields that can be configured in VRF Max Routes Settings are described below:
Parameter Description
Max Routes
Enter the maximum number of routes within the VRF here. The range is from 1 to
16384.
Warning Threshold
Enter the warning threshold value here. Notification messages will be sent when
the number of routes reaches the threshold and no more routes will be written into
the hardware. The range is from 1 to 100 percent.
Select the warning-only option to specify that when the number of routes
exceeds the threshold, a notification message will be sent. More routes, however,
can still be written into the hardware.
None
Select this option to disable the limit feature.
Click the Apply button to accept the changes made.
The fields that can be configured in VRF Import Map Settings are described below:
Parameter Description
Import Map Name
Enter the name of the import Route Map of the VRF here.
None
Select this option to disable the import of the Route Map.
Click the Apply button to accept the changes made.
The fields that can be configured in Route Distinguisher Settings are described below:
Parameter Description
Route Distinguisher
Enter the Route Distinguisher (RD) of the VRF here. This is used to prepend an 8-
bytes value to an IPv4 prefix to create a VPN-IPv4 prefix.
Click the Apply button to accept the changes made.
The fields that can be configured in VPN Route Target Community Settings are described below:
Parameter Description
Route Target Extended
Community
Enter the value of the Route Target here. The Route Target is a useful VPN
application. One VRF can have multiple route targets.
Route Target Type
Select the Route Target type here. Options to choose from are:
• Import - Specifies to add an import Route Target to import routing
information from the target VPN extended community.
• Export - Specifies to add an export Route Target to export routing
information to the target VPN extended community.
• Both - Specifies to add both an import Route Target and an export route
target.
Click the Apply button to accept the changes made.
After clicking the Show Detail button, the following page will appear.