DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
254
Figure 6-56 OSPFv2 Passive Interface Settings Window
The fields that can be configured are described below:
Parameter Description
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Select VRF button to select a pre-configured VRF instance that will
be used here.
Interface Name
Enter the interface name that will be used here. This name can be up to 12
characters long. Select the Default option to use the default interface here.
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Select VRF button, the following page will appear.
Figure 6-57 OSPFv2 Passive Interface Settings (Select VRF) Window
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv2 Area Settings
This window is used to display and configure the OSPFv2 area settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Area Settings, as shown below:
To Next Page
Loading...
