DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
263
The fields that can be configured in OSPF Virtual Link Table are described below:
Parameter Description
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Select VRF button to select a pre-configured VRF instance that will
be used here.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Double-click on the entry in the table to view more detailed information about the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Select VRF button, the following page will appear.
Figure 6-68 OSPFv2 Virtual Link Settings (Select VRF) Window
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After double clicking on an entry in the table, the following page will appear.
Figure 6-69 OSPFv2 Virtual Link Settings (Double Click) Window
Click the Back button to return to the previous window.
OSPFv2 LSDB Table
This window is used to display the OSPFv2 LSDB table and information.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 LSDB Table, as shown below:
To Next Page
Loading...
