DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
272
After clicking a Normal area the Process ID link (1) in the table, the following page will appear.
Figure 6-84 OSPFv3 Area Settings (Process ID, Normal) Window
Click the OK button to close the window and return to the previous window.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv3 Interface Settings
This window is used to display and configure the OSPFv3 interface settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Interface Settings, as shown below:
Figure 6-85 OSPFv3 Interface Settings Window
The fields that can be configured in OSPFv3 Interface Settings are described below:
Parameter Description
Process ID
Enter the ID for an IPv6 OSPF routing process here. It is locally assigned and
should be unique for each IPv6 OSPF routing process on the router. The range is
from 1 to 65535.
To Next Page
Loading...
