D-Link DGS-3630 SERIES - Page 30

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
18
The fields that can be configured are described below:
Parameter Description
Host IPv4 Address
Enter the system log server IPv4 address here.
Host IPv6 Address
Enter the system log server IPv6 address here.
UDP Port
Enter the system log server UDP port number here. This value must be either 514
or between 1024 and 65535. By default, this value is 514.
Severity
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Facility
Select the facility number that will be logged here. The range is from 0 to 23. Each
facility number is associated with a specific facility. See the table below:
Facility Number Facility Name Facility Description
0
kern Kernel messages
1
user User-level messages
2
mail Mail system
3
daemon System daemons
4
auth1 Security/authorization messages
5
syslog Messages generated internally by the
SYSLOG
6
lpr Line printer sub-system
7
news Network news sub-system
8
uucp UUCP sub-system
9
clock1 Clock daemon
10
auth2 Security/authorization messages
11
ftp FTP daemon
12
ntp NTP subsystem
13
logaudit Log audit
14
logalert Log alert
15
clock2 Clock daemon
16
local0 Local use 0 (local0)
17
local1 Local use 1 (local1)
18
local2 Local use 2 (local2)
19
local3 Local use 3 (local3)
20
local4 Local use 4 (local4)
21
local5 Local use 5 (local5)
22
local6 Local use 6 (local6)
23
local7 Local use 7 (local7)
Discriminator Name
Enter the name of the discriminator that will be used to filter messages sent to the
log server here. This name can be up to 15 characters long.
VRF Name
Enter the name of the Virtual Routing and Forwarding (VRF) instance here. This
name can be up to 12 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.