DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
352
Parameter Description
• VPNv4 VRF - Specifies to display BGP routing information related to the
VRF instance in the VPNv4 address family. Enter the name of the VRF
instance here. This name can be up to 12 characters long. Alternatively, click
the Please Select button to select a pre-configured VRF instance that will be
used here.
• L2VPN VPLS All - Specifies to display all BGP routing information related to
the Layer 2 VPN VPLS address family.
• L2VPN VPLS RD - Specifies to display BGP routing information related to
the Route Distinguisher (RD) in the Layer 2 VPN VPLS address family.
• L2VPN VPLS VFI - Specifies to display BGP routing information related to
the VFI instance in the Layer 2 VPN VPLS address family. Enter the name of
the VFI instance here. This name can be up to 12 characters long.
Type
Select the type here. Options to choose from are:
• IP Address - Specifies to display BGP routing information related to the
specified IPv4/IPv6 address.
○ IP Address - Enter the IPv4 address that will be used here.
○ IPv6 Address - Enter the IPv6 address that will be used here.
• Network - Specifies to display BGP routing information related to the
specified network.
○ Network - Enter the starting and ending IPv4 addresses in the network
range here. Select the Longer Prefixes option to display the specified
route and all more specific routes.
○ IPv6 Network - Enter the IPv6 network address and prefix length here.
Select the Longer Prefixes option to display the specified route and all
more specific routes.
• Route Map - Specifies to display BGP routing information related to the
specified route map.
○ Route Map Name - Enter the name of the route map here. This name
can be up to 16 characters long.
○ L2VPN Prefix - Enter the Layer 2 VPN prefix here.
• CIDR Only - Specifies to display BGP routing information related to the
Classless Inter-Domain Routing (CIDR) routes.
• Community - Specifies to display BGP routing information related to the
specified BGP community.
○ Community Set - Enter the AS and community number of the BGP
community here.
○ Local AS - Select this option to specify not to send out of the local AS
or sub-autonomous system of a confederation.
○ No Advertise - Select this option to specify not to advertise the route to
other BGP peers.
○ No Export - Select this option to specify not to advertise to external
peers.
○ Internet - Select this option to specify routes free to be advertised to all
peers.
○ Exact Match - Select this option to specify that an exact match is
required. All of the communities and only those communities specified
must be present.
○ L2VPN Prefix - Enter the Layer 2 VPN prefix here.
• Community List - Specifies to display BGP routing information related to the
specified BGP community list.
To Next Page
Loading...
