DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
363
Parameter Description
• IPv4 Multicast - Specifies to configure the BGP neighbor filter settings
related to the IPv4 multicast address family.
• L2VPN VPLS - Specifies to configure the BGP neighbor filter settings related
to the Layer 2 VPN VPLS address family.
• VPNv4 - Specifies to configure the BGP neighbor filter settings related to the
VPNv4 address family.
• IPv6 Unicast - Specifies to configure the BGP neighbor filter settings related
to the IPv6 unicast address family.
Neighbor
Select and enter the BGP neighbor here. Options to choose from are:
• IPv4 Address - Enter the IPv4 address of the BGP neighbor here.
• Peer Group - Enter the name of the peer group of the BGP neighbor here.
This name can be up to 16 characters long.
• IPv6 Address - Enter the IPv6 address of the BGP neighbor here.
Filter List Type
Select the filter list type here. Options to choose from are:
• In - Specifies to apply the access list to incoming routes.
• Out - Specifies to apply the access list to outgoing routes.
Filter List Action
Select the filter list action here. Options to choose from are Add and Delete.
Filter List Name
Enter the name of the AS path access list that will be used here. This name can
be up to 16 characters long.
Prefix List Type
Select the prefix list type here. Options to choose from are:
• In - Specifies the filter list applied to paths advertised from the neighbor.
• Out - Specifies the filter list applied to paths to be advertised to the neighbor.
Prefix List Action
Select the prefix list action here. Options to choose from are Add and Delete.
Prefix List Name
Enter the name of the prefix list here. This name can be up to 32 characters long.
Capability ORF Prefix List
Action
Select to enable or disable the ORF prefix list capability feature here. The BGP
ORF capability can be used to reduce the number of prefixes exchanged with the
peer. Typically, this must be configured in pairs on the local router and the remote
router. This function can operate in one direction or in both directions.
Capability ORF Prefix List
Type
Select the capability ORF prefix list type here. Options to choose from are
Receive, Send, and Both
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following page will appear.
Figure 6-208 Neighbor Filter Settings (Please Select) Window
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
