DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
393
Figure 6-243 VRRPv3 Settings Window
The fields that can be configured are described below:
Parameter Description
VLAN
Enter the ID of the VLAN interface that will be used here. The range is from 1 to
4094.
VRID
Enter the virtual router ID used to identify the VRRP group here. The range is
from 1 to 255.
Address Family
Select the address family used here. Option to choose from are:
• IPv4 - Specifies to create an IPv4 virtual router.
• IPv6 - Specifies to create an IPv6 virtual router.
Interface Name
Enter the name of the VLAN interface that will be used in the display here. This
string can be up to 12 characters long.
Click the Apply button to accept the changes made.
Click the Find button to find and display an entry based on the information entered.
Click the Edit button to configure more detailed settings of the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will appear:
Figure 6-244 VRRPv3 Settings (Edit) Window
The fields that can be configured are described below:
To Next Page
Loading...
