DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
443
Figure 8-15 Extended MAC ACL (Add Rule) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Action
Select the action that this rule will take here. Options to choose from are Permit,
Deny, and Deny CPU.
Source
Select and enter the source MAC address information here. Options to choose
from are Any, Host, MAC, and Wildcard.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the source host MAC address here.
• When the MAC option is selected, the Wildcard option will also be available.
Enter the source MAC address and wildcard value in the spaces provided.
Destination
Select and enter the destination MAC address information here. Options to
choose from are Any, Host, MAC, and Wildcard.
• When the Any option is selected, any destination traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the destination host MAC address
here.
• When the MAC option is selected, the Wildcard option will also be available.
Enter the destination MAC address and wildcard value in the spaces
provided.
Specify Ethernet Type
Select the Ethernet type option here. Options to choose from are aarp, appletalk,
decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-console, mop-dump,
vines-echo, vines-ip, xns-idp, and arp.
Ethernet Type
Enter the Ethernet type hexadecimal value here. This value must be between
0x600 and 0xFFFF. When the Ethernet type profile is selected, above, the
To Next Page
Loading...
