DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
34
NOTE: By default, there are no user accounts created on the Switch.
To view the following window, click Management > User Accounts Settings, as shown below:
After selecting the User Management Settings tab, the following page will appear.
Figure 4-2 User Accounts Settings Window
The fields that can be configured are described below:
Parameter Description
User Name
Enter the user account name here. This name can be up to 32 characters long.
Privilege
Enter the privilege level for this account here. The range is from 1 to 15.
Password Type
Select the password type for this user account here. Options to choose from are
None, Plain Text, Encrypted-SHA1, and Encrypted-MD5.
Password
After selecting Plain Text, Encrypted-SHA1, or Encrypted-MD5 as the
password type, enter the password for this user account here.
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified user account entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After selecting the Session Table tab, the following page will appear.
Figure 4-3 Session Table Window
On this page, a list of active user account session will be displayed.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
