DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
476
Figure 9-31 RADIUS Group Server Settings Window
The fields that can be configured are described below:
Parameter Description
Group Server Name
Enter the RADIUS group server name here. This name can be up to 32
characters long.
IP Address
Enter the group server IPv4 address here.
IPv6 Address
Enter the group server IPv6 address here.
Click the Add button to add a new entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the RADIUS group server.
Click the Delete button to remove the specified entry.
After clicking the Show Detail button, the following page will be available.
Figure 9-32 RADIUS Group Server Settings (Detail) Window
The fields that can be configured are described below:
Parameter Description
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
IPv4 RADIUS Source
Interface Name
Enter the name of the source IPv4 RADIUS interface here.
IPv6 RADIUS Source
Interface Name
Enter the name of the source IPv6 RADIUS interface here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
