DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
532
Parameter Description
• Chassis - Specifies to transmit the sender ID TLV with the chassis ID
information.
• Manage - Specifies to transmit the sender ID TLV with the managed address
information.
• Chassis-Manage - Specifies to transmit the sender ID TLV with the chassis
ID information and the managed address information.
Click the Apply button to accept the changes made.
After clicking the Add MA button, the following page will appear.
Figure 10-3 CFM Settings (Add MA) Window
The fields that can be configured are described below:
Parameter Description
MA Name
Enter the Maintenance Association (MA) entry name here. This name can be up
to 22 characters long. Each MA in an MD must have a unique MA name. MAs
configured in different MDs may have the same MA identifier. When the MA entry
is deleted, the configuration on it is also deleted.
MA VID
Enter the Maintenance Association (MA) entry VLAN ID here. The range is from 1
to 4094.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MEP button to add a new Maintenance association End Point (MEP) entry.
After clicking the Edit button, the following page will appear.
Figure 10-4 CFM Settings (Add MA, Edit) Window
The fields that can be configured in the table are described below:
To Next Page
Loading...
