DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
583
The fields that can be configured for Egress VLAN Mode Settings are described below:
Parameter Description
Egress VLAN Mode
Select the egress VLAN mode of the VPLS here. The egress VLAN mode will
affect the outer VLAN tag handling before the decapsulated packet egress on
ACs belonging to this VPLS. Options to choose from are:
• Strip - Specifies that the outer-tag of the packet will be stripped before
egress on the AC.
• Change VLAN - Specifies that the outer-tag of the packet will be changed to
the VLAN ID of the AC before egress on the AC. This can only be applied on
Ethernet VLAN-based ACs.
Select the None option to use the default setting.
Click the Apply button to accept the changes made.
After clicking the Show Detail button, the following page will appear.
Figure 12-7 VPLS Settings (Show Detail) Window
Click the Show Detail link to vie more detailed information about the topic.
Click the Back button to return to the previous window.
After clicking the Show Detail link for Peers Via Pseudowires, for example, the following page will appear.
Figure 12-8 VPLS Settings (Show Detail, Show Detail) Window
To Next Page
Loading...
