DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
666
Authentication Fail
Trap Name Description OID
authenticationFailure An authenticationFailure trap signifies that the SNMPv2
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMPv2 must be capable of
generating this trap, the snmpEnableAuthenTraps object
indicates whether this trap will be generated.
1.3.6.1.6.3.1.1.
5.5
BGP
Trap Name Description OID
bgpEstablishedNotification The bgpEstablishedNotification event is generated when
the BGP FSM enters the established state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
1.3.6.1.2.1.15.
0.1
bgpBackwardTransNotification The bgpBackwardTransNotification event is generated
when the BGP FSM moves from a higher numbered state
to a lower numbered state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
1.3.6.1.2.1.15.
0.2
BPDU Protection
Trap Name Description OID
dBpduProtectionAttackOccur This trap is sent when the BPDU attack happened on an
interface.
Binding objects:
(1) ifIndex
(2) dBpduProtectionIfCfgMode
1.3.6.1.4.1.171
.14.47.0.1
dBpduProtectionAttackRecover This trap is sent when the BPDU attack recovered on an
interface.
Binding objects:
(1) ifIndex
1.3.6.1.4.1.171
.14.47.0.2
CFM
Trap Name Description OID
dot1agCfmFaultAlarm This trap is initiated when a connectivity defect is
detected.
Binding objects:
(1) dot1agCfmMepHighestPrDefect
1.3.111.2.802.
1.1.8.0.1
To Next Page
Loading...
