DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
77
Figure 4-58 DHCPv6 Relay Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the interface VLAN ID used in the DHCPv6 relay here. The range is from 1
to 4094.
Destination IPv6 Address
Enter the DHCPv6 relay destination address.
Output Interface VLAN
Enter the output interface VLAN ID for the relay destination here. The range is
from 1 to 4094.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Relay Remote ID Profile Settings
This window is used to display and configure the DHCPv6 relay remote ID profile settings. This is used to create a
new profile for DHCPv6 relay Option 82.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Remote ID Profile
Settings, as shown below:
Figure 4-59 DHCPv6 Relay Remote ID Profile Settings Window
The fields that can be configured are described below:
Parameter Description
Profile Name
Enter the profile name here. This string can be up to 32 characters long.
Format String
After clicking the Edit button, enter the Option 82 format string here. This string
can be up to 251 characters long.
To Next Page
Loading...
