Keysight x-series Programmer's Reference

Table Of Contents
Mech Atten Step 436
3.2.3.3 Range (Baseband Input models) 437
Range Auto/Man 437
I Range 438
Q Range 440
Q Same as I 441
3.2.3.4 Range (Non-attenuator models) 441
Range 442
Adjust Range for Min Clipping 442
Pre-Adjust for Min Clipping 442
Peak-to-Average Ratio 443
Mixer Lvl Offset 444
3.2.3.5 Signal Path 444
Presel Center 445
Preselector Adjust 446
Internal Preamp 447
LNA 449
µW Path Control 450
Allow Full Bypass in Auto 459
Software Preselection 460
SW Preselection Type 462
SW Preselection BW 462
High Freq Prefilter 463
3.2.4 BW 464
3.2.5 Display 465
3.2.5.1 Meas Display 465
Display Null Subcarriers 465
Display Data Subcarriers 465
Display Pilot Subcarriers 465
Display Preamble Subcarriers 466
Display Sync Correlation in Percent 466
Display EVM in Percent (SCPI only) 466
3.2.5.2 View 467
View 467
User View 467
Restore Layout to Default 468
Save Layout as New View 468
Re-Save User View 468
Rename User View 469
Delete User View 469
Delete All User Views 469
View Editor Remote Commands 470
View Listing Query 470
User View Listing Query 470
3.2.5.3 Annotation 471
14 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)