Keysight x-series Programmer's Reference

Table Of Contents
Marker X 488
Mkr -> CF 488
3.2.8 Meas Setup 489
3.2.8.1 Component Carrier 489
3.2.8.2 Settings 489
Avg|Hold Number 489
Averaging On/Off 489
Average Mode 490
Copy CC To 490
Spur Avoidance 491
Optimize EVM 492
EVM Optimization Method 492
Iterative EVM Optimization Target 493
Auto Couple 493
Meas Preset 495
3.2.8.3 Meas Standard 495
Preset to Std 495
3.2.8.4 Component Carrier 496
Measure Carrier 497
Frequency Offset 497
Bandwidth 497
Spectrum 498
Configure Comp Carriers 498
Configure CCs 498
Advanced Acquisition 498
Input Channel (GUI only) 499
Use Advanced Acquisition Table 499
IF Path Auto 499
Mechanical Attenuation 499
Elec Attenuation 500
LNA 500
Internal Preamp 500
uW Path Control 501
IF Gain 501
IF Path 502
3.2.8.5 Meas Time 502
Search Length 503
Result Length 503
Meas Interval 504
Meas Offset 504
Capture Time Diagram 504
Burst Search 504
Burst Search Threshold 505
3.2.8.6 Demod 505
Demod Settings 505
16 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)